J/9 SPECIFICATIONS 2-8-21

• Hull and deck molded with biaxial and unidirectional E-glass fabrics and Corecell foam for optimal strength to weight ratio. High density core inserts used in way of highly loaded hardware.
• White gelcoat hull with single boot stripe.
• 10 year transferable warranty against osmotic hull blistering, 5 year structural warranty.
• White gelcoat deck with molded non-skid on horizontal deck surfaces.
• High strength, inward turning and overlapping hull to deck joint.
• Molded ISO/ORC height foredeck toe-rails on foredeck.
• Large self-draining cockpit with wrap-around seating and angled backrests.
• Two large cockpit seat storage lockers.
• Swim platform with transom boarding access and optional fold-up swim ladder.
• Molded, structural transverse keel support beams.
• 4.9’ draft low VCG lead keel bonded and bolted to keel sump. Option for 3.9’ draft keel.

• High aspect, balanced spade rudder mounted in self-aligning, low friction rudder bearings.
• Custom laminated, varnished, curved tiller.
• Spinlock adjustable tiller extension with handle.

• One AGM Group 27 battery.
• 12V DC On/Off battery switch.
• 12V DC electrical distribution panel w/ 4 circuit breakers.
• LED navigation lights.
• UL approved stranded, tinned copper ABYC color-coded wiring.
• Bonding system to meet ABYC regulations.
• Two swiveling LED reading lights in main cabin.
• Two red/white dome lights.
• Automatic electric bilge pump and panel switch for manual operation.

• SS fabricated chainplates for shrouds.
• Foredeck skylight hatch mounted on cabin house forward of mast.
• Two opening portlights on cabin house sides.
• Companionway opening with molded seahood and slider.
• Acrylic offshore removable dropboard with inside/outside lockable hasp.
• Two 2-Speed Harken 35:1 self-tailing winches on cabin top.
• Two 10″ lock-in winch handles with winch handle pockets.
• Two fixed jib tracks on cabin top with plunger-style jib cars. Option for self-tacking jib system.
• 5:1 Harken mainsheet system leading to boom-mounted ratchet block/cam near the tiller.
• Adjustable backstay system with control lines led to the cockpit.
• Harken jib furling system with control line led to cockpit
• Halyard lead blocks mounted at mast base, halyard organizers and Spinlock double rope clutches one per side.
• Stainless bow rail, stanchions and stern rails with single 20” height lifeline, starboard boarding gate and transom gate.
• Foredeck and transom mooring cleats (4).
• Cockpit operated manual bilge pump operable from the helm.

• Tapered, fractional, keel-stepped Sparcraft aluminum mast with single sweptback spreaders attached with stainless thru-bar. Mast includes halyard sheaves, fittings for boom and boom vang attachments, masthead crane, shroud termination points and a steaming light. Spars are anodized and powder-coated white.
• Aluminum boom with 8:1 outhaul, mainsheet attachment points, sheaves for the outhaul and reef line, and lazy jack terminations.
• Standing rigging: 1×19 wire forestay & side rigging with adjustable open-body turnbuckles. Soft Dyneema backstay.
• Running rigging package including main halyard, jib halyard, main sheet, two jib sheets, reef line, furler line, lazy jacks.

• Main cabin with full length settee berth and removable backrest to port, double seat to starboard, storage compartments outboard and below the berth/seats.
• Choice of Sunbrella fabrics for 3″ standard main salon cushions.
• Teak and holly synthetic high-wear cabin sole in main cabin with centerline access to bilge.
• 48 Quart Igloo cooler.
• Angled companionway steps with nonskid treads.
• Molded V-berth supports (Option for V-berth platform & cushions).
• Head platform with Raritan PH-II WC, TP holder, holding tank and deck pump out fitting.
• Centerline storage aft of companionway (or engine compartment and systems w/inboard engine option).
• Air-dry gelcoat finish on interior hull & deck surfaces.

• Two-tone deck.
• Additional Opening portlights (2) on aft face of cabin.
• Self-tacking jib system with athwartships track with jib sheet led aft to cockpit.
• Sail-Away Starter Package – North Nordac mainsail and jib (choice of either 104% jib or 90% self-tacking jib); B&G Triton2 speed/depth instrument package; sprayed anti-foul bottom finish with barrier coat.
• Code Zero/A-Sail Deck Package – fixed carbon bowsprit with tack line, two spinnaker sheets, halyard, and turning blocks to lead the sheet tails to the cabin top winches.
• 110V 30amp Shorepower system with shore cord and AC panel one interior 110V outlet & battery charger.
• V-Berth package with platform, two cushions and two swiveling reading lights.
• Outboard bracket
• Electric inboard engine with pod-drive and cockpit operated controller.
• Inboard diesel engine (Yanmar 2YM15) with Saildrive and two-blade folding prop.
• Flexiteek synthetic cockpit floor and swim platform surfaces.
• Retractable/folding swim ladder.
• Comfort Group – mainsail cover and tiller cover in matching Sunbrella, and 2” cockpit cushions in white vinyl.
• Cockpit dodger with side curtains.